Ratios turn the figures in the financial statements into measures that can be compared over time and between businesses. This is the most calculation-heavy A Level chapter: almost every Paper 3 includes a ratio calculation followed by an evaluation of what the business should do. Learn each formula exactly, what a good or bad result means, and how a business could improve it.
The worked example
All the examples below use the same company, whose statements are in the financial statements notes ($000): revenue 2,000; cost of sales 1,200; gross profit 800; operating profit 300; profit for the year 200; dividends 80; inventory 180 (220 at the start of the year); trade receivables 220; cash 100; current assets 500; current liabilities 300 (of which trade payables 150); non-current liabilities 600; equity 1,100. It has 1 million shares, priced at $3.00.
Liquidity ratios
Liquidity is the ability to pay short-term debts as they fall due. A profitable business can still fail if it runs out of cash.
current ratio = current assets ÷ current liabilities
acid test ratio = (current assets − inventory) ÷ current liabilities
Example: current ratio = 500 ÷ 300 = 1.67 : 1. Acid test = (500 − 180) ÷ 300 = 1.07 : 1.
A current ratio around 1.5–2 and an acid test around 1 are often seen as comfortable, but it depends on the industry: a supermarket that sells for cash and turns inventory quickly can safely operate with lower ratios. Too low means risk of not paying debts; too high means money tied up in idle assets that could earn a return. The acid test is stricter because inventory may be hard to sell quickly.
Improving liquidity: sell off surplus inventory, chase customers to pay sooner, sell and lease back assets, raise long-term finance (shares or long-term loans) to replace short-term debt, or delay payments to suppliers (carefully).
Profitability ratios
gross profit margin (%) = gross profit ÷ revenue × 100
profit margin (operating profit margin) (%) = operating profit ÷ revenue × 100
return on capital employed (ROCE) (%) = operating profit ÷ capital employed × 100
capital employed = non-current liabilities + equity (shares + reserves)
Example: gross profit margin = 800 ÷ 2,000 × 100 = 40%. Profit margin = 300 ÷ 2,000 × 100 = 15%. Capital employed = 600 + 1,100 = 1,700, so ROCE = 300 ÷ 1,700 × 100 = 17.6%.
The gap between the gross and operating margins shows how much overheads take. ROCE is the key measure of how well the business uses its capital; compare it with the interest rate on savings or loans (if ROCE is below the interest rate, the capital would earn more elsewhere) and with rivals.
Improving profitability: raise prices (if demand is price inelastic), cut cost of sales (cheaper suppliers, less waste, better productivity), cut overheads, or sell unused assets to reduce capital employed. “Sell more” on its own isn’t an answer: margins are percentages, so they only improve if each sale becomes more profitable.
Financial efficiency ratios
rate of inventory turnover = cost of sales ÷ average inventory
average inventory = (opening inventory + closing inventory) ÷ 2
trade receivables turnover (days) = trade receivables ÷ revenue (credit sales) × 365
trade payables turnover (days) = trade payables ÷ cost of sales (credit purchases) × 365
Example: average inventory = (220 + 180) ÷ 2 = 200, so inventory turnover = 1,200 ÷ 200 = 6 times a year. Receivables turnover = 220 ÷ 2,000 × 365 = 40 days. Payables turnover = 150 ÷ 1,200 × 365 = 46 days.
- A higher inventory turnover means stock is sold faster and less cash is tied up, though what is normal varies hugely: a bakery’s turnover is far higher than a furniture shop’s.
- Fewer receivables days means customers pay faster, helping cash flow; too strict credit terms may lose customers.
- More payables days helps cash flow, but paying suppliers too slowly can damage relationships and lose discounts. Ideally a business collects from customers faster than it pays suppliers; here it collects in 40 days and pays in 46.
Improving efficiency: JIT or better inventory control, selling off slow-moving stock, shorter credit terms or discounts for early payment, factoring receivables, and negotiating longer credit with suppliers.
Gearing
gearing ratio (%) = non-current liabilities ÷ capital employed × 100
Example: 600 ÷ 1,700 × 100 = 35.3%.
Gearing measures how far the business’s long-term capital comes from borrowing. Above about 50% is usually seen as highly geared. High gearing means heavy interest payments that must be paid even when profits fall, and more risk if interest rates rise; lenders may refuse more credit. But borrowing can raise returns to shareholders when the business earns more on the money than the interest it pays, and it avoids diluting ownership. Low gearing is safer but may mean missing profitable opportunities.
Reducing gearing: issue more shares, retain more profit, sell assets to repay loans. Raising it (when sensible): take long-term loans to fund growth, or buy back shares.
Investment ratios
These show shareholders and potential investors the return they get from dividends and the market’s view of the company.
dividend per share = total dividends ÷ number of shares
dividend yield (%) = dividend per share ÷ current share price × 100
dividend cover = profit for the year ÷ total dividends
earnings per share = profit for the year ÷ number of shares
price/earnings (P/E) ratio = current share price ÷ earnings per share
Example: dividend per share = $80,000 ÷ 1,000,000 = $0.08, so dividend yield = 0.08 ÷ 3.00 × 100 = 2.7%. Dividend cover = 200 ÷ 80 = 2.5 times. Earnings per share = $0.20, so P/E = 3.00 ÷ 0.20 = 15.
- A higher dividend yield means a better income return at today’s price.
- Higher dividend cover means the dividend is safer and more profit is retained for growth; a cover below 1 means dividends are being paid out of past profits.
- A high P/E ratio shows investors expect strong future earnings growth.
Improving investor return: raise profits, increase the dividend (though this leaves less for reinvestment and lowers cover), or buy back shares to raise earnings per share.
Limitations of ratio analysis
- Ratios use historical data, which may not predict the future.
- They need comparison with past years, competitors or industry averages to mean anything, and different industries have different norms.
- The statements show one date, which may be untypical (window dressing before the year end; seasonal businesses).
- Different accounting methods (depreciation, inventory valuation) make comparisons unreliable.
- Inflation distorts comparisons over time.
- Ratios ignore qualitative factors: staff morale, brand strength, customer loyalty, quality of management, the economy.
- They show symptoms, not causes: a falling ROCE needs investigation to find out why.
Answering the Paper 3 and 4 questions
Typical questions: “Calculate the new gearing ratio if SLS borrows $3 million… Evaluate the likely impact on SLS’s shareholders of the decision to increase long-term borrowing”; “Calculate the dividend cover for 2024. Evaluate whether PAIR should increase dividends”; “Evaluate the most effective method WS could use to improve investor return”; or “Analyse two methods to improve IPA’s liquidity.”
Papers 3 and 4 mark long answers on knowledge, application, analysis and evaluation, and “Analyse” questions stop before evaluation. Plan every long answer in the same five steps, in this order:
- Knowledge: state the formula and define the ratio; explain what it measures.
- Application: calculate it accurately from the case data (show working and units: ratio, %, times or days) and compare with previous years, competitors or targets given in the case.
- Analysis: explain what the result means and its consequences: for example, gearing rising to 55% after the loan means interest payments of $X must be met even if sales fall, increasing the risk to shareholders’ dividends.
- Evaluation: consider the limitations of the data, the context (industry norms, interest rates, the purpose of the borrowing), the trade-offs (liquidity versus profitability, dividends versus reinvestment), and qualitative factors.
- Conclusion: make a justified judgement, for example: the extra borrowing is likely to benefit shareholders overall, because the expected ROCE of 20% is well above the 7% interest rate, provided sales forecasts are met.
Check yourself
Current assets are $400,000, of which inventory is $150,000; current liabilities are $250,000. Calculate the current and acid test ratios.
Current ratio = 1.6 : 1; acid test = 250,000 ÷ 250,000 = 1 : 1.
Operating profit is $90,000 and capital employed is $600,000. Calculate ROCE.
15%.
Non-current liabilities are $450,000 and equity is $550,000. Calculate the gearing ratio. Is the business highly geared?
450 ÷ 1,000 × 100 = 45%: not highly geared by the usual 50% guide, but close to it.
Why might a high current ratio be a problem?
Too much money is tied up in inventory, receivables or cash that could be used more profitably.
Give three limitations of ratio analysis.
Any three of: historical data; needs comparisons; one-date snapshot or window dressing; different accounting methods; inflation; ignores qualitative factors; shows symptoms not causes.
Now practise it
Try the 30 past paper questions on Analysis of published accounts, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.