Direct costs are easy to charge to a product. Overheads — factory rent, supervisors, power, depreciation — are not, but a business still needs to know the full cost of each product to set prices, value inventory and judge profitability. Absorption costing charges a fair share of production overheads to every unit made. Paper 2 often asks for an overhead analysis sheet, absorption rates, the cost and price of a job or product, and the under- or over-absorption.
Allocation: charging a whole overhead to the one cost centre that caused it (the machining supervisor’s salary to machining). Apportionment: sharing an overhead between several cost centres on a fair basis (rent by floor area). Absorption: charging each cost centre’s overheads to the units that pass through it, using an overhead absorption rate (OAR).
The method
- Allocate overheads that belong to one cost centre.
- Apportion shared overheads on a fair basis: rent, rates, heating and lighting by floor area (or volume); insurance and depreciation of machinery by the value of machinery; canteen and personnel costs by the number of employees; power by machine hours or kilowatt-hours.
- Reapportion service department costs (stores, maintenance, canteen) to the production departments, on a basis showing how much each one uses the service (stores by the number of material requisitions, maintenance by maintenance hours). If one service department also serves another, reapportion the one that serves the other first. After this step, all overheads sit in production departments.
- Calculate an OAR for each production department: budgeted overheads ÷ budgeted activity. Use machine hours in a machine-intensive department and direct labour hours in a labour-intensive one (other bases: per unit when all units are alike; a percentage of direct labour cost or prime cost).
- Absorb: each unit’s overhead = hours it spends in each department × that department’s OAR. Add to prime cost for the full production cost.
Overhead absorption rate = budgeted production overheads ÷ budgeted level of activity
Fully worked example
Kestrel Furniture has two production departments, Machining and Assembly, and one service department, Stores. Budgeted overheads for the year:
| Budgeted overheads | $ |
|---|---|
| Indirect labour (allocated: Machining 46,000; Assembly 38,000; Stores 24,000) | 108 000 |
| Indirect materials (allocated: Machining 8,800; Assembly 6,200; Stores 2,600) | 17 600 |
| Rent | 60 000 |
| Heating and lighting | 18 000 |
| Insurance of machinery | 12 000 |
| Depreciation of machinery | 30 000 |
| Total | 245 600 |
| Machining | Assembly | Stores | |
|---|---|---|---|
| Floor area (m²) | 3 000 | 2 000 | 1 000 |
| Value of machinery ($) | 240 000 | 50 000 | 10 000 |
| Material requisitions | 600 | 400 | – |
| Budgeted machine hours | 19 000 | – | – |
| Budgeted direct labour hours | – | 26 000 | – |
Steps 1–3: the overhead analysis sheet.
| Overhead analysis sheet | Machining $ | Assembly $ | Stores $ | Total $ |
|---|---|---|---|---|
| Indirect labour (allocated) | 46 000 | 38 000 | 24 000 | 108 000 |
| Indirect materials (allocated) | 8 800 | 6 200 | 2 600 | 17 600 |
| Rent (floor area 3 : 2 : 1) | 30 000 | 20 000 | 10 000 | 60 000 |
| Heating and lighting (floor area) | 9 000 | 6 000 | 3 000 | 18 000 |
| Insurance of machinery (machinery value) | 9 600 | 2 000 | 400 | 12 000 |
| Depreciation of machinery (machinery value) | 24 000 | 5 000 | 1 000 | 30 000 |
| Total | 127 400 | 77 200 | 41 000 | 245 600 |
| Stores reapportioned (requisitions 600 : 400) | 24 600 | 16 400 | (41 000) | 0 |
| Total production department overheads | 152 000 | 93 600 | 0 | 245 600 |
For example, insurance: 12,000 × 240,000 ÷ 300,000 = $9,600 to Machining.
Step 4: absorption rates. Machining is machine-intensive: 152,000 ÷ 19,000 machine hours = $8.00 per machine hour. Assembly is labour-intensive: 93,600 ÷ 26,000 direct labour hours = $3.60 per direct labour hour.
Step 5: the cost and price of a product. A bookcase uses $18 of direct materials and $30 of direct labour; it spends 0.5 machine hours in Machining and 2 direct labour hours in Assembly. The company adds 25% to full cost.
| Cost card: one bookcase | $ |
|---|---|
| Direct materials | 18.00 |
| Direct labour | 30.00 |
| Prime cost | 48.00 |
| Machining overhead (0.5 × $8.00) | 4.00 |
| Assembly overhead (2 × $3.60) | 7.20 |
| Full production cost | 59.20 |
| Mark-up (25%) | 14.80 |
| Selling price | 74.00 |
Under- and over-absorption
The OAR is set in advance from budgeted figures, but overheads are absorbed using actual activity. At the year end the overheads absorbed won’t exactly equal the overheads actually incurred.
- Overheads absorbed = actual activity (hours) × the budgeted OAR.
- Compare with actual overheads.
- If absorbed is less than actual, overheads are under-absorbed: profit is overstated, so the difference is an extra expense (debit the statement of profit or loss).
- If absorbed is more than actual, overheads are over-absorbed: the difference is added back to profit (credit the statement of profit or loss).
Causes: actual overheads higher or lower than budgeted (price rises, unexpected repairs, savings), or actual activity different from budget (more or fewer hours worked because of demand, breakdowns, strikes).
Kestrel, actual results for the year: Machining worked 18,500 machine hours and incurred overheads of $149,300; Assembly worked 26,800 direct labour hours and incurred $94,100.
- Machining: absorbed 18,500 × $8.00 = $148,000; actual $149,300; under-absorbed $1,300 (fewer hours than budgeted and higher spending).
- Assembly: absorbed 26,800 × $3.60 = $96,480; actual $94,100; over-absorbed $2,380.
| Dr | $ | Cr | $ |
|---|---|---|---|
| Bank and other accounts (actual overheads) | 149 300 | Work in progress (overheads absorbed) | 148 000 |
| Statement of profit or loss: under-absorbed | 1 300 | ||
| 149 300 | 149 300 |
Overall, overheads were over-absorbed by 2,380 − 1,300 = $1,080: the products were charged slightly more overhead than was actually spent, so $1,080 is added to profit in the costing profit statement.
Common errors: apportioning before allocating; forgetting to reapportion the service department; using budgeted hours instead of actual hours to calculate overheads absorbed; and getting under- and over-absorption the wrong way round (under-absorbed means not enough was charged — an extra cost).
Uses and limitations of absorption costing
| Uses and advantages | Limitations |
|---|---|
| Every unit carries a share of all production costs, so prices set on full cost cover overheads in the long run | Apportionment bases are arbitrary; a different basis gives a different unit cost |
| Required for valuing inventory in the financial statements (IAS 2 includes production overheads) | Based on budgets; under- or over-absorption is always likely |
| Shows managers the full cost of each department and product | Fixed overheads are treated as if they varied with output, which can mislead decisions (see marginal costing) |
| Profit is not distorted by building up inventory in a seasonal business, because fixed costs are carried forward in inventory | Profit can be increased simply by producing more than is sold |
Non-financial factors still matter when using full costs to set prices or choose products: competitors’ prices, quality, customer loyalty, the effect on staff, and the reputation of the business.
Answering the Paper 1 and 2 questions
Typical questions: “Prepare an overhead analysis sheet”; “Calculate a suitable overhead absorption rate for each production department”; “Calculate the total cost and selling price of job 241”; “Calculate the under- or over-absorption of overheads”; or “Discuss the usefulness of absorption costing for setting prices.”
Paper 1 has 30 multiple-choice questions: work each one out on paper before you look at the options, because the wrong options are the answers you get from the common mistakes. Paper 2 has four structured questions (30, 15, 15 and 30 marks): you prepare accounts and calculations, then explain, discuss or advise. The written parts are marked on knowledge, analysis and evaluation. Plan every “discuss”, “advise” or “evaluate” answer in the same five steps, in this order:
- Knowledge: define allocation, apportionment, absorption, cost centre and cost unit, and explain the choice of basis.
- Application: use the figures: apportion each overhead with a clear basis, calculate the OARs and the full cost.
- Analysis: explain the result: for example, Machining is machine-intensive, so a machine-hour rate charges each product for the machine time it actually uses.
- Evaluation: weigh the strengths (all costs covered) against the weaknesses (arbitrary bases, budget estimates, under- or over-absorption), and consider competitors’ prices and other non-financial factors.
- Conclusion: reach a clear judgement, for example: Kestrel should use full cost as a guide but set the bookcase price with the market in mind, because a price of $74 may be above what competitors charge.
Check yourself
Rent of $24,000 is apportioned on floor area: department A 600 m², B 400 m², C 200 m². How much goes to A?
24,000 × 600 ÷ 1,200 = $12,000.
Budgeted overheads $90,000; budgeted machine hours 15,000. What is the OAR?
$6 per machine hour.
Actual hours 14,200; OAR $6; actual overheads $87,500. Under- or over-absorbed?
Absorbed 85,200; under-absorbed by $2,300 (an extra expense).
Which basis would you choose to apportion canteen costs?
The number of employees in each department.
Why are service department costs reapportioned?
Products pass only through production departments, so all overheads must end up there before they can be absorbed into units.
Now practise it
Try the 93 past paper questions on Absorption costing, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.