← Topical Vault

Efficiency and market failure Revision notes

Unit 7: The price system and the microeconomy · Chapter 32 · about 11 minutes · written for the 9708 syllabus · last checked 2026-11-14

Efficiency is the yardstick the whole of the A Level microeconomics course uses. When an essay asks whether a monopoly is bad, whether a merger should be allowed, or whether the government should step in, the real question is usually: is the market using scarce resources in the best possible way? This topic gives you the precise meanings of “efficient”, and the list of reasons why free markets sometimes are not.

What efficiency means

Because resources are scarce, every economy has to decide what to make, how to make it and who gets it. Economic efficiency means getting the most out of those scarce resources. Economists split it into types, and you must keep them apart:

TypeThe question it answersCondition
Productive efficiencyAre goods made at the lowest possible cost?Output at the lowest point of the average cost curve
Allocative efficiencyAre we making the right goods, in the right amounts?Price = marginal cost (P = MC)
Pareto optimalityCould anyone be made better off without someone losing?No: nobody can gain without someone else losing
Dynamic efficiencyAre things getting better over time?Innovation and investment lower costs and improve products

The first two together are sometimes called static efficiency: efficiency at one moment in time, with today’s technology.

Productive efficiency

Productive efficiency: producing output at the lowest possible average cost, so that the fewest resources are used for each unit.

For a firm, this means producing at the minimum point of its average cost (AC) curve, where the marginal cost curve cuts it. It also means using the cheapest combination of inputs and wasting nothing: no idle machines, no unnecessary staff, no inefficient processes.

For a whole economy, productive efficiency means producing on the production possibility curve (PPC). At any point inside the curve, more of one good could be made without making less of the other, so resources are being wasted or left unemployed.

A production possibility curve: X inside the curve is inefficient, W and Y on the curve are productively efficient, Z outside is unattainable Capital goods Consumer goods 0 PPC X Y W Z
X is productively inefficient: more of both goods could be made. W and Y are both productively efficient. Z can’t be reached with the resources and technology available.

A firm using all its machines flat out is not necessarily productively efficient. The test is whether it is at the lowest point of its AC curve. Pushing output beyond that point means each extra unit costs more than the average, so average cost rises.

Why competition helps: in a competitive market, a firm whose costs are higher than its rivals’ has to charge more, loses customers and eventually goes out of business. So competition forces firms to keep costs as low as possible. Where there is no competition, costs can drift above the lowest possible level because there is no pressure to keep them down. This waste is called X-inefficiency.

Allocative efficiency

Allocative efficiency: resources are used to produce the goods and services consumers want most, in the right quantities. It occurs where price = marginal cost.

Why P = MC? Think about what each side measures:

  • Price is what consumers are willing to pay for the last unit, so it measures the benefit society gets from that unit.
  • Marginal cost is the cost of the resources used to make that unit, so it measures the opportunity cost: what those resources could have produced elsewhere.

If price is above MC, people value one more unit more than it costs to make, so society would gain from producing more. If price is below MC, the last unit costs more than it is worth to anyone, so too much is being made. Only when P = MC is output exactly right.

Worked example

UnitValue to consumers ($)Marginal cost ($)Produce it?
1st208Yes: gain of $12
2nd189Yes: gain of $9
3rd1611Yes: gain of $5
4th1414P = MC: the efficient output
5th1217No: loss of $5
6th1020No: loss of $10

The first three units each give society more benefit than they cost: a total net gain of 12 + 9 + 5 = $26. The fourth adds nothing either way. Producing a fifth would reduce the net gain by $5. So 4 units is allocatively efficient.

Allocative efficiency is at Q*, where marginal benefit equals marginal cost; producing only Q1 loses the shaded net benefit Price, costs and benefits Quantity 0 D = MB S = MC Q* Q1 MB = MC lost net benefit
Each unit up to Q* gives more benefit than it costs. If only Q1 is produced, the shaded triangle of net benefit is lost: this is a deadweight loss, and the market is allocatively inefficient.

On a PPC, allocative efficiency is one particular point on the curve: the mix of goods that matches what consumers want. Every point on the curve is productively efficient, but only one is allocatively efficient, and which one depends on consumer preferences, which the PPC doesn’t show.

Strictly, allocative efficiency for society needs marginal social benefit = marginal social cost (MSB = MSC). P = MC only gives the right answer if there are no external costs or benefits. This is the bridge to externalities: a polluting factory can have P = MC and still be producing too much.

Both at once: perfect competition

A perfectly competitive firm in the long run is the textbook example of a firm that achieves both kinds of static efficiency.

A perfectly competitive firm in long-run equilibrium produces Q, where price equals marginal cost and average cost is at its minimum Costs and revenue Output 0 AC MC AR = MR = P Q P
In long-run equilibrium the firm produces Q, where price = MC (allocatively efficient) and the firm is at the minimum of its AC curve (productively efficient).
  • It maximises profit where MC = MR, and for a price taker MR = price, so P = MC.
  • Free entry and exit push price down to the minimum of AC in the long run, so it produces at minimum average cost, earning only normal profit.

A monopoly, by contrast, usually sets price above MC and produces below the output where AC is lowest, so it is neither allocatively nor productively efficient. The full comparison is in the market structures notes.

Pareto optimality

Pareto optimality: a situation where it is impossible to make anyone better off without making someone else worse off.

A change that makes at least one person better off and nobody worse off is a Pareto improvement. If such a change is possible, the current situation is not Pareto optimal: resources could be used better.

On the PPC above, every point on the curve (W, Y) is Pareto optimal: to make more consumer goods, you have to make fewer capital goods. Point X is not: you can make more of both, so someone can gain and nobody needs to lose.

Two important things to understand for evaluation:

  • Pareto optimal doesn’t mean fair. There are many Pareto optimal points. One where a single person owns almost everything can still be Pareto optimal, because making anyone else better off would mean taking something from that person. Efficiency and equity are different goals.
  • Most real changes create losers. A new airport benefits travellers and airlines but harms people living nearby. Strictly, it is not a Pareto improvement. Economists often ask instead whether the winners gain enough that they could compensate the losers and still be better off. That is the idea behind cost–benefit analysis, though in practice the compensation is often never paid.

Dynamic efficiency

Dynamic efficiency: efficiency over time, achieved when firms invest in research, new technology, new production methods and new products, so costs fall and quality rises in the long run.

Dynamic efficiency: innovation and investment shift the long-run average cost curve down over time Average cost Output 0 LRAC1 (before) LRAC2 (after investing in new technology)
Investment in better technology and methods shifts the whole long-run average cost curve downwards: the same output can now be made at a lower cost.

Examples: car factories replacing manual assembly with robots; phone makers bringing out faster, cheaper models each year; supermarkets using data to cut waste. Dynamic efficiency usually needs money to invest and an incentive to do so:

  • Firms earning supernormal profit (often large firms or monopolies) have the funds for research and development, and can keep the rewards of new ideas because rivals can’t easily copy or enter.
  • Firms in perfect competition earn only normal profit in the long run, and any new idea is quickly copied, so they may have neither the money nor the incentive.

This creates a classic trade-off for essays: a monopoly may be statically inefficient (P > MC, not at minimum AC) but dynamically efficient (using its profits to innovate). Whether it actually innovates, or just enjoys the profits, depends on the firm and on whether it fears new competition.

Market failure

Market failure: when a free market, left to itself, does not allocate resources efficiently.

The market produces too much of some things, too little of others, or doesn’t provide some things at all. A market that doesn’t exist at all (as with pure public goods) is called complete market failure; a market that exists but produces the wrong quantity is partial market failure. The main causes:

CauseWhat goes wrong
ExternalitiesCosts or benefits fall on third parties, so the market ignores them: too much pollution, too little vaccination.
Public goodsNon-excludable and non-rival, so people can free ride and firms can’t charge: street lighting or flood defences may not be provided at all.
Merit and demerit goodsPeople underestimate the benefits of merit goods (education, health checks) and the harm of demerit goods (smoking), so they under- or over-consume.
Information failureBuyers or sellers lack information, or one side knows more than the other (asymmetric information), leading to adverse selection and moral hazard.
Market powerMonopolies and cartels restrict output and raise price above MC.
Missing property rightsNobody owns the resource (the ocean, the atmosphere), so it is overused: the “tragedy of the commons”.
Factor immobilityWorkers and capital can’t move easily to where they are needed, leaving unemployment in one place and shortages in another.

Many economists also see a very unequal distribution of income and wealth as a failure of the market, though this is about equity rather than efficiency. Climate change is often described as the biggest market failure of all: emitters don’t pay for the damage, the atmosphere has no owner, and the costs fall on people in other countries and in the future.

Market failure is about resource allocation. Rising unemployment, inflation or a temporary shortage of ice cream on a hot day are not, by themselves, examples of market failure. Traffic noise affecting people who live next to a busy road is, because it is an external cost.

Answering the Paper 4 essay

Typical questions: “Assess whether perfect competition is the market structure most likely to achieve economic efficiency”, or “Consider whether efficiency in resource allocation can be achieved without government intervention.”

Plan every long answer in the same five steps, in this order. They match how long answers are marked:

  1. Knowledge: define productive efficiency (minimum AC), allocative efficiency (P = MC, or MSB = MSC for society), dynamic efficiency and Pareto optimality precisely.
  2. Application: link the definitions to real markets: close-to-competitive markets such as farm produce or foreign exchange, compared with markets that clearly fail, such as air pollution, public goods like street lighting, or industries dominated by a few firms.
  3. Analysis: draw long-run perfect competition and explain why it gives P = MC = minimum AC: profit maximisation at MC = MR with MR = price, and free entry and exit removing supernormal profit. So in theory the market alone can be statically efficient.
  4. Evaluation: perfect competition is very rare; even a competitive market ignores externalities, so P = MC is not the same as MSB = MSC; it may lack dynamic efficiency because firms earning normal profit can’t fund research or gain economies of scale; markets don’t provide public goods or fix information failure; but government intervention can also fail.
  5. Conclusion: competitive markets are good at delivering static efficiency for ordinary private goods, but where there are externalities, public goods or heavy investment needs, the free market alone is unlikely to be fully efficient, so some well-designed intervention is usually needed.

Check yourself

What is the condition for allocative efficiency, and why?

Price = marginal cost. Price measures the value consumers put on the last unit, and MC measures the opportunity cost of the resources used to make it. When they are equal, no change in output could increase total net benefit.

An economy moves from one point on its PPC to another point on the same PPC. What happens to productive efficiency?

Nothing: both points are on the PPC, so both are productively efficient. Allocative efficiency could change, though, if the new mix of goods matches consumers’ preferences better or worse.

When is an economy Pareto inefficient?

When it is possible to make someone better off without making anyone else worse off. On a PPC diagram, that is any point inside the curve.

A firm has P = $10 and MC = $7 at its current output. Is it allocatively efficient? What should happen to output?

No. Consumers value the last unit at $10 but it only costs $7 to make, so society would gain from more output, until price and MC are equal.

Why might a monopoly be more dynamically efficient than a perfectly competitive firm?

A monopoly can earn supernormal profit in the long run, which gives it the funds for research and investment, and barriers to entry let it keep the rewards, which gives it the incentive. A perfectly competitive firm earns only normal profit and its ideas are quickly copied.

Now practise it

Try the 88 past paper questions on Efficiency and market failure, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.

Practise Efficiency and market failure questions →