← Topical Vault

Marginal costing Revision notes

Chapter 35 · about 35 minutes · written for the 9706 syllabus · last checked 2026-11-18

Marginal costing separates costs into variable costs, which change with output, and fixed costs, which don’t. Every unit sold earns a contribution towards the fixed costs; once they are covered, every further unit adds its contribution to profit. This simple idea answers most short-term decisions: how many units must we sell to break even? Should we accept this order? Should we make this part or buy it? It is the most heavily examined costing topic in Paper 2’s question 4.

Marginal cost: the variable cost of making one more unit (direct materials, direct labour, direct expenses and variable overheads). Contribution: selling price − variable cost (per unit), or revenue − total variable costs (in total).

Contribution per unit = selling price − variable cost per unit

Profit = total contribution − fixed costs

Break-even point (units) = fixed costs ÷ contribution per unit

Contribution to sales (C/S) ratio = contribution ÷ selling price (or total contribution ÷ revenue)

Break-even revenue = fixed costs ÷ C/S ratio

Units for a target profit = (fixed costs + target profit) ÷ contribution per unit

Margin of safety = budgeted (or actual) output − break-even output (in units, in $, or as a % of budgeted output)

Break-even analysis: worked example

Toro Ltd makes one product, selling at $40. Variable costs per unit: direct materials $12, direct labour $8, variable overheads $4. Fixed costs are $48,000 a month (fixed production overheads $30,000; selling and administration $18,000). Budgeted sales are 4,000 units a month.

  • Variable cost = 12 + 8 + 4 = $24; contribution = 40 − 24 = $16 per unit.
  • Break-even point = 48,000 ÷ 16 = 3,000 units; break-even revenue = 3,000 × $40 = $120,000.
  • C/S ratio = 16 ÷ 40 = 0.4; check: 48,000 ÷ 0.4 = $120,000. ✓
  • Budgeted profit = 4,000 × 16 − 48,000 = $16,000.
  • Margin of safety = 4,000 − 3,000 = 1,000 units ($40,000 of revenue, or 1,000 ÷ 4,000 = 25%): sales could fall by a quarter before Toro makes a loss.
  • Units needed for a profit of $24,000 = (48,000 + 24,000) ÷ 16 = 4,500 units.

Interpreting a break-even chart

You won’t be asked to draw one, but you may have to read one or explain what it shows.

Break-even chart: the revenue line crosses the total cost line at 3,000 units and $120,000; below that output is a loss, above it a profit; budgeted output of 4,000 units gives a margin of safety of 1,000 units 0 60,000 120,000 180,000 240,000 0 1,000 2,000 3,000 4,000 5,000 6,000 Margin of safety Revenue Total cost Fixed cost Break-even point Profit Loss (budget) Output (units) $
Break-even chart for Toro Ltd: selling price $40, variable cost $24 per unit, fixed costs $48,000 a month.
  • The fixed cost line is horizontal at $48,000: these costs are paid even at zero output.
  • The total cost line starts at $48,000 (fixed costs) and rises by the variable cost of each unit.
  • The revenue line starts at zero and rises more steeply, because each unit sells for more than its variable cost.
  • Where they cross is the break-even point: 3,000 units and $120,000. To the left, total cost is above revenue (the loss area); to the right, revenue is above total cost (the profit area). The vertical gap between the lines at any output is the profit or loss.
  • The distance from the break-even point to budgeted output is the margin of safety.
  • A higher selling price makes the revenue line steeper and moves the break-even point left; higher fixed or variable costs move it right.

Limitations of break-even analysis: it assumes the selling price and variable cost per unit are the same at every output (no bulk discounts, no price cuts to sell more); that fixed costs never change (they may step up); that everything made is sold; and that there is one product (or a constant sales mix). Figures are forecasts. It is still a quick, clear guide to risk and to the effect of changing prices or costs.

Marginal and absorption costing profit statements

Under marginal costing, inventory is valued at variable cost only and all fixed costs are charged in the period they arise. Under absorption costing, inventory also carries a share of fixed production overheads (see absorption costing). When inventory levels change, the two methods report different profits.

In March Toro made 5,000 units (its normal output, used to set the absorption rate) and sold 4,000. There was no opening inventory. Fixed production overhead absorption rate = 30,000 ÷ 5,000 = $6 per unit, so full production cost = 24 + 6 = $30 per unit.

Marginal costing statement for March$$
Revenue (4,000 × $40)160 000
Variable cost of production (5,000 × $24)120 000
Less closing inventory (1,000 × $24)(24 000)
Variable cost of sales(96 000)
Contribution64 000
Fixed production overheads30 000
Fixed selling and administration18 000(48 000)
Profit16 000
Absorption costing statement for March$$
Revenue (4,000 × $40)160 000
Cost of production (5,000 × $30)150 000
Less closing inventory (1,000 × $30)(30 000)
Cost of sales(120 000)
Gross profit40 000
Selling and administration(18 000)
Profit22 000
Reconciliation of the profits$
Profit under absorption costing22 000
Less fixed overheads carried forward in the increase in inventory (1,000 × $6)(6 000)
Profit under marginal costing16 000

The difference is always the change in inventory × the fixed overhead absorbed per unit. When inventory rises, absorption costing shows the higher profit (some fixed costs are carried forward to next month in the inventory); when inventory falls, marginal costing shows the higher profit; when they are equal, profits are the same. (Here production equalled normal output, so there was no under- or over-absorption to adjust for.)

Using contribution for decisions

  1. Identify the costs and revenues that change because of the decision. Fixed costs that will be paid anyway are not relevant, even if a full-cost figure includes them.
  2. Compare the extra contribution with any extra fixed costs.
  3. Make the decision that gives the higher total profit — then check the non-financial factors.

Special order. Toro normally sells 4,000 units a month and has capacity for 5,500. A new customer offers to buy 800 units at $30 each — no more than the full production cost of $30, before any selling costs — with delivery costing Toro an extra $1,000. Extra contribution = 800 × (30 − 24) = 4,800, less 1,000 = +$3,800. Fixed costs don’t change, so profit rises by $3,800: accept, provided there is spare capacity (4,800 units in total is within 5,500), regular customers won’t find out and demand the lower price, and the price covers variable costs.

Make or buy. Toro makes a handle for each product: variable cost $9 (materials $5, labour $3, variable overhead $1) plus $4 of absorbed fixed overhead, a full cost of $13. A supplier offers handles at $11. The fixed overheads would still be paid, so the relevant comparison is $9 to make against $11 to buy: making saves $2 a handle, $8,000 a month on 4,000 handles. Keep making — unless the freed capacity could earn more than $8,000 of contribution in some other way, or the supplier’s quality or reliability is much better.

Closing a business unit. Delta Stores has three departments. Fixed costs of $78,000 are shared out in proportion to revenue.

Delta Stores: results by departmentA $B $C $Total $
Revenue120 00090 00050 000260 000
Variable costs(66 000)(54 000)(38 000)(158 000)
Contribution54 00036 00012 000102 000
Fixed costs apportioned(36 000)(27 000)(15 000)(78 000)
Profit (loss)18 0009 000(3 000)24 000

Department C appears to lose $3,000. But its $15,000 share of the fixed costs would still be paid if it closed. Closing C would lose its $12,000 contribution, so total profit would fall from $24,000 to $12,000. Keep C open while it makes a positive contribution — unless some fixed costs would be saved by closing it (and the saving is more than $12,000), or the space could be used for something more profitable.

Limiting factor. Vela Ltd makes X and Y. Material is limited to 9,000 kg a month. Fixed costs are $40,000.

XY
Selling price$50$45
Variable cost$30$27
Contribution per unit$20$18
Material per unit4 kg2 kg
Contribution per kg$5.00$9.00
Ranking2nd1st
Maximum demand1,500 units2,000 units

X has the higher contribution per unit, but material is the scarce resource, so rank by contribution per kg. Make all 2,000 Y first (4,000 kg), then use the remaining 5,000 kg for 5,000 ÷ 4 = 1,250 X. Contribution = 2,000 × 18 + 1,250 × 20 = 36,000 + 25,000 = $61,000; profit = 61,000 − 40,000 = $21,000. Making all 1,500 X first would give only $57,000 of contribution.

Non-financial factors in every decision: the reaction of regular customers (special orders at low prices), quality and reliability of a supplier (make or buy), job losses, staff morale and the business’s reputation (closure), customer goodwill if one product is not supplied (limiting factor), and whether the figures are reliable estimates.

Uses and limitations of marginal costing

Uses and advantagesLimitations
Shows clearly how profit changes with output; essential for short-term decisionsNot acceptable for inventory in the financial statements (IAS 2 requires production overheads to be included)
Profit is not affected by changes in inventory, so it can’t be increased just by producing morePrices based on contribution may not cover fixed costs in the long run
No arbitrary apportionment of fixed costsSplitting semi-variable costs into fixed and variable parts may be difficult
Break-even and margin of safety are easy to calculateAssumes costs and prices behave in a straight line

Answering the Paper 1 and 2 questions

Typical questions: “Calculate the break-even point in units and in revenue”; “Calculate the margin of safety”; “Prepare statements showing the profit using marginal costing and absorption costing, and reconcile them”; “Advise the directors whether to accept the special order”; or “Calculate the production plan which maximises profit.”

Paper 1 has 30 multiple-choice questions: work each one out on paper before you look at the options, because the wrong options are the answers you get from the common mistakes. Paper 2 has four structured questions (30, 15, 15 and 30 marks): you prepare accounts and calculations, then explain, discuss or advise. The written parts are marked on knowledge, analysis and evaluation. Plan every “discuss”, “advise” or “evaluate” answer in the same five steps, in this order:

  1. Knowledge: define contribution, break-even point, margin of safety and the limiting factor, and state which costs are relevant.
  2. Application: calculate the figures for the decision: the extra contribution, the break-even point, the ranking per unit of the limiting factor.
  3. Analysis: explain the result: for example, department C covers its variable costs and contributes $12,000 to fixed costs that would be paid anyway, so closing it would cut profit by $12,000.
  4. Evaluation: weigh the figures against the assumptions (constant prices and costs, spare capacity) and the non-financial factors (customers, staff, suppliers, reputation).
  5. Conclusion: give a clear, justified decision, for example: Toro should accept the special order, because it adds $3,800 of profit using spare capacity — provided regular customers are not offered the same price.

Check yourself

Selling price $25; variable cost $15; fixed costs $30,000. Calculate the break-even point in units and revenue.

Contribution $10; 3,000 units; $75,000.

Using the same figures, budgeted sales are 4,000 units. What is the margin of safety as a percentage?

1,000 ÷ 4,000 = 25%.

How many units are needed for a profit of $20,000?

(30,000 + 20,000) ÷ 10 = 5,000 units.

Production 6,000 units, sales 5,000; fixed production overhead absorbed at $4 per unit; no opening inventory. Which method shows the higher profit, and by how much?

Absorption costing, by 1,000 × $4 = $4,000.

A product earns $6 contribution and uses 3 machine hours; another earns $5 and uses 2 hours. Machine hours are limited. Which should be made first?

The second: $2.50 per hour against $2.00 per hour.

Now practise it

Try the 191 past paper questions on Marginal costing, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.

Practise Marginal costing questions →