← Topical Vault

Costs Revision notes

Unit 5: Finance and accounting · Chapter 31 · about 15 minutes · written for the 9609 syllabus · last checked 2026-11-18

Knowing what things cost is the basis of pricing, profit and almost every operational decision. This chapter covers the types of cost, two approaches to costing, how cost information is used (including special orders), and break-even analysis, the most calculation-heavy topic in AS Business. Paper 2 nearly always includes a cost, contribution or break-even calculation.

Cost information

Accurate cost information is needed to set prices that cover costs, calculate profit, decide whether to make or buy, accept or reject orders, compare the performance of products or branches, and control spending. Inaccurate costs lead to prices that are too low (losses) or too high (lost sales).

CostMeaningExamples
Fixed costsDon’t change with the level of output in the short runRent, salaries, insurance, loan interest
Variable costsChange directly with outputRaw materials, packaging, piece-rate wages
Direct costsCan be identified with a particular product or departmentMaterials for that product; wages of workers making it
Indirect costs (overheads)Can’t be traced to one product; shared across the businessOffice rent, managers’ salaries, marketing for the whole business

Fixed/variable is about how costs behave as output changes; direct/indirect is about whether they can be traced to a product. Most direct costs are variable and most indirect costs are fixed, but not always.

Full costing and contribution costing

Full costing: all costs, direct and indirect, are allocated to products or departments, with indirect costs (overheads) shared out using a chosen basis, such as a proportion of direct costs.

Contribution: revenue minus variable (direct) costs. Contribution goes towards paying fixed costs; once they are covered, it becomes profit.

Contribution costing: judging products by the contribution they make, without allocating fixed overheads to them.

contribution per unit = selling price − variable cost per unit

total contribution = total revenue − total variable costs

profit = total contribution − fixed costs

Example: a business makes two products. Product A has revenue of $30,000 and direct costs of $20,000; Product B has revenue of $16,000 and direct costs of $10,000. Overheads are $12,000.

  • Full costing, sharing overheads in proportion to direct costs (A 2/3, B 1/3): A carries $8,000 and B $4,000, so each shows a profit of $2,000.
  • Contribution costing: A contributes 30,000 − 20,000 = $10,000; B contributes 16,000 − 10,000 = $6,000. Together they contribute $16,000, which covers the $12,000 overheads and leaves $4,000 profit.

Full costing: uses: simple, makes sure prices cover all costs, shows the full cost of each product. Limitations: the way overheads are shared is arbitrary, so a product can look unprofitable just because of the basis chosen; dropping such a product can make the business worse off, because its overheads don’t disappear.

Contribution costing: avoids arbitrary allocation, and shows whether a product helps pay the fixed costs. Use it when deciding whether to keep or drop a product, and for special orders. Limitations: it ignores the fixed costs, so prices based only on contribution may not cover all costs in the long run; and some costs are hard to classify as fixed or variable. It would not be used to set the normal price of all products, because the business must cover its fixed costs overall.

Contribution is not profit. A product with a positive contribution may still show a loss under full costing, yet dropping it would reduce total profit, because the overheads it was helping to pay remain.

Uses of cost information

  • Total cost = fixed costs + variable costs. Average (unit) cost = total cost ÷ output. Marginal cost = the extra cost of producing one more unit (in the short run, the variable cost per unit).
  • Pricing: cost-plus pricing adds a mark-up to unit cost; knowing the marginal cost shows the lowest price at which an extra unit adds to profit.
  • Monitoring performance: comparing costs between periods, products or branches identifies waste and inefficiency; profit = revenue − total costs.

Special order decisions

A special order is a one-off order, often at a lower price than usual. Using contribution costing, the business should accept it if the price is above the variable cost per unit (positive contribution), it has spare capacity, and it won’t upset regular customers or the brand.

Example: a firm with spare capacity sells at $20 with a variable cost of $12. A buyer offers $15 each for 1,000 extra units. Contribution = (15 − 12) × 1,000 = +$3,000, so profit rises by $3,000, since fixed costs are already covered. But if regular customers learn of the lower price, they may demand it too.

Break-even analysis

Break-even output: the level of output at which total revenue equals total costs, so the business makes neither a profit nor a loss.

break-even output = fixed costs ÷ contribution per unit

margin of safety = actual (or expected) output − break-even output

profit = (output × contribution per unit) − fixed costs

Example: price $20, variable cost $12, so contribution per unit = $8. Fixed costs are $40,000. Break-even = 40,000 ÷ 8 = 5,000 units. Expected sales are 7,000 units, so the margin of safety = 2,000 units and profit = 7,000 × 8 − 40,000 = $16,000. (Average cost at 7,000 units = (40,000 + 84,000) ÷ 7,000 ≈ $17.71.)

A break-even chart: with a price of $20, variable cost of $12 per unit and fixed costs of $40,000, total revenue meets total costs at 5,000 units. At expected sales of 7,000 units the margin of safety is 2,000 units Costs and revenue ($) Output (units) 0 fixed costs total costs total revenue break-even 5,000 7,000 margin of safety profit 100,000 200,000
Below 5,000 units total costs exceed revenue (a loss); above it, revenue exceeds costs (a profit). The margin of safety shows how far sales could fall before a loss is made.

Uses: shows how much must be sold to avoid a loss, which is useful when starting a business or launching a product and for loan applications; shows the effect of changes in price or costs (“what if?” analysis); and the margin of safety shows the level of risk.

Limitations: it assumes all output is sold, the selling price is the same at every level of output, costs are straight lines (no bulk discounts or overtime), and fixed costs stay fixed. It is only as accurate as the data used, applies to a single product, and says nothing about demand: just because a business can calculate break-even doesn’t mean it can sell that much.

Answering the Paper 1 and 2 questions

Typical questions: “Evaluate whether using break-even analysis is essential for the success of a new hotel”; “Evaluate whether break-even analysis is the most important finance activity for a new manufacturer of bicycles”; “Evaluate whether Markus needs accurate cost information before setting up OFD” (Paper 2); or calculations of contribution, break-even, margin of safety or a special order.

In Paper 1 Section B you answer one two-part essay: part (a) for 8 marks and part (b) for 12 marks. Each Paper 2 question ends with an 8-mark part and a 12-mark part. The 12-mark parts must include evaluation, and long answers are marked on knowledge, application, analysis and evaluation. Plan every long answer in the same five steps, in this order:

  1. Knowledge: define the costs and techniques in the question and give the formulas: contribution, break-even, margin of safety.
  2. Application: calculate accurately with the case data, showing working, and apply the results to the business: its costs, prices, capacity and expected sales.
  3. Analysis: build chains: for example, break-even analysis shows the hotel must fill 60% of its rooms to cover costs, so managers know how many guests they need and can test the effect of a lower room price on that target.
  4. Evaluation: question the assumptions (all output sold, constant prices and costs), the accuracy of the data, the need to consider demand and competitors, and other activities that matter as much (cash flow forecasting, market research).
  5. Conclusion: make a justified judgement, for example: break-even analysis is very useful for a new hotel’s planning, but it isn’t essential on its own, because success depends on attracting enough guests, which market research and marketing must deliver.

Check yourself

Classify these as fixed or variable: rent, raw materials, insurance, packaging.

Fixed: rent, insurance. Variable: raw materials, packaging.

Price is $50, variable cost $30, fixed costs $60,000. Calculate break-even output.

Contribution per unit = $20; break-even = 60,000 ÷ 20 = 3,000 units.

In the last question, expected sales are 4,500 units. What are the margin of safety and profit?

Margin of safety = 1,500 units; profit = 4,500 × 20 − 60,000 = $30,000.

When should a business accept a special order below its normal price?

When the price is above the variable cost per unit (positive contribution), it has spare capacity, and the order won’t harm regular sales or the brand.

Give three limitations of break-even analysis.

Any three of: assumes all output is sold; assumes constant price; assumes straight-line costs; fixed costs may change; only as good as the data; single product; ignores demand.

Now practise it

Try the 91 past paper questions on Costs, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.

Practise Costs questions →