← Topical Vault

Characteristics of countries at different levels of development Revision notes

Unit 11: International economic issues · Chapter 51 · about 15 minutes · written for the 9708 syllabus · last checked 2026-11-16

Low-income and high-income countries differ in predictable ways: how fast their populations grow, their age structure, how many people live in cities, how unequal incomes are, what people work at and what the country trades. This topic covers each of these and how to measure them. Paper 4 asks you to compare the characteristics of developed and developing countries, and data questions often ask you to calculate rates or a Gini coefficient.

Population growth

Birth rate: the number of live births per 1,000 people in a year.

Death rate: the number of deaths per 1,000 people in a year.

Infant mortality rate: the number of deaths of babies under one year old per 1,000 live births in a year.

Net migration: immigration minus emigration. The net migration rate is net migration per 1,000 people.

Natural increase = birth rate − death rate

Population change = natural increase + net migration

Worked example

A country of 50 million has a birth rate of 30 per 1,000 and a death rate of 8 per 1,000. Natural increase = 22 per 1,000 = 2.2%, so 50m × 0.022 = 1.1 million more people. If net migration is −0.2 million (more people leave than arrive), the population grows by 0.9 million, or 1.8%.

Why birth rates are higher in low-income countries

  • Children can work on family farms and support parents in old age, where there are no pensions.
  • High infant mortality: families have more children expecting some not to survive.
  • Less access to contraception and family planning.
  • Fewer girls in education and fewer women in paid work: as women’s education and job opportunities rise, birth rates fall.
  • Cultural and religious traditions favouring large families.

Why death rates have fallen

Better healthcare and vaccination, clean water and sanitation, and better nutrition. Death rates usually fall before birth rates do, which is why populations of developing countries grew so fast in the 20th century. As countries develop further, birth rates fall too, and population growth slows: this pattern is called the demographic transition.

Infant mortality is one of the clearest indicators of development: it ranges from fewer than 3 per 1,000 in some high-income countries to over 50 in some of the poorest.

Population structure

Population pyramids: a low-income country has a wide base of children and few older people; a high-income country has fewer children and many more older people 0–14 15–29 30–44 45–59 60–74 75+ male female (a) Typical low-income country 0–14 15–29 30–44 45–59 60–74 75+ male female (b) Typical high-income country
(a) A high birth rate and lower life expectancy give a wide base and a narrow top. (b) Low birth rates and long life expectancy give a more even shape, with many older people.

Dependency ratio: the number of dependants (usually people aged under 15 and over 64) compared with the number of people of working age.

  • In many low-income countries the dependency ratio is high because there are so many children. This puts pressure on schools and health services and leaves fewer workers to support each dependant.
  • In many high-income countries it is rising because of ageing: more pensioners, higher spending on pensions and healthcare, and a shrinking workforce (Japan and much of Europe).

A high dependency ratio can hold back productivity and saving: households spend more on supporting dependants and save less, and governments must spend on schools or pensions rather than investment. As a large generation of children reaches working age, though, a country can get a demographic dividend: a big workforce with relatively few dependants, if there are jobs for them.

Optimum population

Optimum population: the population size at which output per head is at its highest, given the country’s land, capital and technology.

Optimum population: output per head is highest at the optimum population; with fewer people resources are underused, and with more people diminishing returns reduce output per head Output per head Population 0 optimum underpopulated overpopulated
Below the optimum, a country is underpopulated: more people would allow more specialisation and fuller use of resources. Above it, it is overpopulated: diminishing returns mean extra people add less output, so output per head falls.

The optimum isn’t fixed: new technology, more capital or better education raise output per head and move the optimum to a larger population.

Urbanisation

Urbanisation: the increasing share of the population living in towns and cities.

High-income countries are mostly urban (often 80% or more); many low-income countries are still mainly rural but urbanising fast.

Causes: people are pushed from the countryside by low farm incomes, lack of land and few services, and pulled to cities by jobs, higher wages, schools, hospitals and better infrastructure.

Benefits: cities allow specialisation, larger markets, external economies of scale and cheaper provision of services, so they raise productivity and growth.

Problems: if cities grow faster than jobs and housing, the result is slums, overcrowding, congestion, pollution, pressure on water and sanitation, and large numbers working in the low-paid informal sector.

Income distribution: the Lorenz curve and Gini coefficient

Income is usually much more unequal in middle-income countries (many in Latin America and southern Africa) than in Nordic countries. See equity and redistribution for the policies that affect it.

Worked example: calculating a Gini coefficient

Households are split into five equal groups (quintiles). Their shares of total income are:

QuintileShare of income (%)Cumulative % of householdsCumulative % of income
Poorest 20%5205
Second104015
Third156030
Fourth258055
Richest 20%45100100
A Lorenz curve drawn from quintile data: the poorest 20% of households receive 5% of income, the poorest 40% receive 15%, and so on; the Gini coefficient is area A divided by area A plus B Cumulative % of income 0 Cumulative % of households 5 20 15 40 30 60 55 80 100 100 line of equality A B
The Lorenz curve plots the cumulative figures. Area A lies between the line of equality and the curve; area B lies under the curve.

Gini coefficient = A ÷ (A + B)

With both axes measured from 0 to 1, A + B = 0.5, so Gini = 1 − 2B

Find area B by splitting it into five strips (trapezia), each 0.2 wide. Area of each strip = width × (left height + right height) ÷ 2:

  • 0.2 × (0 + 0.05) ÷ 2 = 0.005
  • 0.2 × (0.05 + 0.15) ÷ 2 = 0.020
  • 0.2 × (0.15 + 0.30) ÷ 2 = 0.045
  • 0.2 × (0.30 + 0.55) ÷ 2 = 0.085
  • 0.2 × (0.55 + 1.00) ÷ 2 = 0.155

B = 0.005 + 0.020 + 0.045 + 0.085 + 0.155 = 0.31. So A = 0.5 − 0.31 = 0.19, and the Gini coefficient = 0.19 ÷ 0.5 = 0.38.

Gini runs from 0 (perfect equality) to 1 (one person has everything); it is sometimes given as the Gini index, the coefficient × 100. As a rough guide, below about 0.3 is fairly equal and above about 0.5 is very unequal.

Economic structure

Employment by sector

As countries develop, the share of employment in the primary sector falls, the secondary sector grows and then shrinks, and the tertiary sector becomes the largest Share of employment (%) Level of development 0 primary secondary tertiary
As countries develop, workers move out of the primary sector, first into manufacturing and then increasingly into services.

In many low-income countries most people work in the primary sector (farming, mining); in high-income countries most work in the tertiary sector (services), often over 70%. The reasons: as productivity in farming rises, fewer workers are needed to produce food; and as incomes rise, people spend a growing share on manufactured goods and then on services such as health, education, finance and leisure.

Productivity

Productivity: output per worker (or per hour worked). It is different from production, which is total output: a country can have a large total output just because it has many workers, while each worker produces little.

Productivity is usually much lower in developing countries because of:

  • less capital per worker (fewer machines and tools);
  • lower levels of education, training and health;
  • older technology and less research;
  • poor infrastructure (unreliable power, roads, internet);
  • many workers in small-scale farming and the informal sector, with little access to credit.

Higher productivity is the main source of rising living standards in the long run, but only if the gains are shared through higher wages, jobs and public services.

Patterns of trade

  • Low-income countries often depend on exporting a few primary products (crops, minerals, oil) and import manufactured goods, machinery and fuel. Commodity prices swing widely, so export earnings are unstable, and in the long run the prices of primary products have tended to fall relative to manufactured goods, worsening their terms of trade.
  • Middle-income countries often export manufactured goods, increasingly with more technology.
  • High-income countries export high-value manufactures and services (finance, software, education, tourism), and much of their trade is with each other.

Summary: typical characteristics

Low-incomeHigh-income
Population growthFast: high birth rateSlow or falling: low birth rate
Age structureYoung: many childrenAgeing: many older people
Infant mortality, life expectancyHigh; lowerVery low; high
UrbanisationLower, rising fastHigh
Main sector of employmentPrimaryTertiary
ProductivityLowHigh
ExportsA few primary productsVaried manufactures and services
Informal economyLargeSmall

These are tendencies, not rules: oil-rich Gulf states have high incomes but a large primary sector, and some middle-income countries are more unequal than low-income ones.

Answering the Paper 4 essay

Typical questions: “Compare the characteristics of developed and developing countries”; “Developing countries have low levels of productivity and a high dependency ratio. Explain these characteristics and consider whether they are linked”; or “Distinguish between productivity and the level of production and discuss why productivity is likely to be lower in a developing economy.”

Plan every long answer in the same five steps, in this order. They match how long answers are marked:

  1. Knowledge: define the characteristics in the question: birth, death and infant mortality rates, the dependency ratio, urbanisation, the Gini coefficient, productivity and production, the sectors of the economy.
  2. Application: use real contrasts: young, fast-growing populations in Niger or Uganda against ageing Japan or Italy; agriculture employing most workers in Mali against services employing most in Sweden; commodity dependence in Zambia (copper) or Nigeria (oil).
  3. Analysis: explain the links: a high birth rate creates a high dependency ratio, which lowers saving and investment per worker, which keeps productivity low; low productivity keeps incomes low, so families depend on children for support, keeping birth rates high (a poverty cycle).
  4. Evaluation: countries in the same income group differ a lot; some characteristics are causes of low development and others are results; a young population can become a demographic dividend; the trends are changing fast in many middle-income countries; and the data are often less reliable in low-income countries.
  5. Conclusion: make a judgement: for example, the characteristics are closely linked and reinforce each other, which is why breaking the cycle (through education, especially of girls, health and investment) is central to development.

Check yourself

A country has a birth rate of 24 per 1,000, a death rate of 9 per 1,000 and a population of 20 million. Ignoring migration, how much does its population grow in a year?

Natural increase = 24 − 9 = 15 per 1,000 = 1.5%. 20m × 0.015 = 300,000 people.

What is the dependency ratio, and why is it high in many low-income countries?

The number of dependants (the young and the old) compared with the working-age population. It is high in many low-income countries because high birth rates mean a large share of the population are children.

In the worked example, the area under the Lorenz curve (B) was 0.31. If B rose to 0.36, what would the Gini coefficient be, and what would it mean?

Gini = 1 − 2 × 0.36 = 0.28. Income would be more equally distributed.

What is the difference between productivity and production?

Production is total output. Productivity is output per worker (or per hour). A country can have high total production with low productivity if it has a very large workforce.

Why do many low-income countries have unstable export earnings?

They rely on a few primary products whose world prices swing widely with changes in global demand and supply (weather, discoveries), so export revenue rises and falls sharply.

Now practise it

Try the 41 past paper questions on Characteristics of countries at different levels of development, with mark schemes. Start with the most recent ones; if one goes wrong, come back to the section above that covers it.

Practise Characteristics of countries at different levels of development questions →